Faulty Cable Tray How To Maintain

Release time:

2025-06-13

Cable bridge all parts of the short-circuit phenomenon, such defects may constitute the distribution cabinet on the current relay operation, the damage caused by the bridge is very serious; will appear defects: short-circuit within the bridge, such defects are generally due to the low quality of the cable and the composition of the appearance will not reveal traces.

There may be a whole cable is burned off or a place where the cable is burned off, making the cable in the defects of the damage is very serious; there may be defects for the bridge only a short circuit, the defects in the cable damage is light, but there will still be very obvious traces. This type of defect may occur because the current is too large or cable quality is too poor and constitute.

Cable bridge equipment balance cylinder action and its oil lubrication system oil circuit, connector number inspection check. Bridge equipment slider and guide rail between the more repeated, should make the necessary adjustments more positive, check the joint parts of the lubrication quality and piping, etc., to ensure excellent operation.

Timely lubrication for the bridge equipment gear parts: gear box and internal parts because often work damage may be greater, the possibility of loosening is greater. When these parts of the noise, you can first lubricate, and then according to the vibration, check the system between the oil injection point of the spit oil volume and pressure test, make appropriate adjustments.

Points To Note For Cable Tray

Installation Of Cable Trays Shall Comply With The Following Provisions

Points To Note For Cable Tray

Installation Of Cable Trays Shall Comply With The Following Provisions

Blogs