Get to know the thermal structure of cable tray

Release time:

2025-06-13

Bridge is a support and put cable bracket. Bridge as a power supply category for the fixed cable equipment, the use has been very extensive. General bridge, not only to take into account the heat dissipation, but also to prevent the cable from moisture, high temperature direct sunlight, but also to be strong impact resistance. But the general bridge can not co-ordinate these points. Therefore, the need to supply a new skill plan to deal with the above problems.

Cable bridge, including the bottom plate and two side panels, said side plate equipment on both sides of the bottom plate, said bottom plate centre is set with a baffle, said baffle evenly open a number of apertures, the two sides of the board is provided with inward bending of the bending edge of the two side boards are provided with a number of axial reinforcing bars, said baffle will be the bottom plate is separated into two cabling area, each cabling area is provided with a heat dissipation structure, the two sides of the board's bending edge is provided with a can be articulated to another Both side panels are provided with a locking device for connecting to another cable bridge.

The heat dissipation structure consists of heat dissipation holes and heat insulating pads, and the heat insulating pads and heat dissipation holes are set at a distance on the base plate. The locking device is a locking steel buckle. Each cabling area is equipped with a heat dissipation structure, and the curved edges of the two side panels are equipped with a locking steel buckle that can be connected to another cable tray.

Railway Electrical Cabling Bridge Solutions

All Parts Of The Bridge Are To Be Galvanised

Railway Electrical Cabling Bridge Solutions

All Parts Of The Bridge Are To Be Galvanised

Blogs